EN  |  中文

PEOPLE

Doctoral Supervisor
HOME >> PEOPLE >> Tutor >> Doctoral Supervisor >> Content
Qingsong ZHANG
UPDATE: 2019-07-21 16:29:42     CLICK: []


Qingsong Zhang

PhD, Professor, PhD Tutor

Dean of School of Civil Engineering; Geotechnical and Structural Engineering Center

Email: zhangqingsong@sdu.edu.cn

Research Interests:

1. Occurrence mechanism and treatment theory of water inrush disaster in underground engineering;

2. Mechanism of grouting diffusion and reinforcement of rock and soil;

3. Grouting simulation test and calculation analysis method;

4. Research and development of new grouting materials, equipment, process and technology.

Selected Publications:

1. Grouting mechanism of quick settingslurry in rock fissure considering viscosity variation with space, Tunnellingand Underground Space Technology. 2017, 70: 262-273.

2. Grouting Diffusion Characteristics in Faults Considering the Interaction of Multiple Grouting[J]. International Journal of Geomechanics, 2016.

3.Parameters Optimization of Curtain Grouting ReinforcementCycle in Yonglian Tunnel and Its Application[J]. Mathematical Problems in Engineering, 2015.

4.Exploration and Grouting of Large-Scale Water Capsule in the Fault Fracture Zone of Yonglian Tunnel[J]. The

Open Civil Engineering Journal, 2015, 9: 32-43.

5.Analysis on strength of fault gouge with preset structural plane after reinforcing by cement-sodium silicate grout[J]. Geotechnical Special Publication, 2016.

6.隧道断层泥注浆加固机制模型试验研究[J],岩石力学与工程学报,20153405):924-934

7.基于浆-土界面应力耦合效应的劈裂注浆理论研究[J],岩土工程学报,20163802):323-330

8.水泥-水玻璃浆液裂隙注浆扩散的室内试验研究[J],岩土力学,2015,(08):2159-2168

9.灰岩角砾岩破碎带涌水综合注浆治理[J],岩石力学与工程学报,2012,(12):2412-2419

10.基于浆液黏度时空变化的水平裂隙岩体注浆扩散机制[J],岩石力学与工程学报,20153406):1198-1210

11.矿井含水构造附近采动岩体的温度响应特征相似模拟研究[J],岩石力学与工程学报,2011,(07):1356-1362

12.海底采煤顶板支承压力分布规律与影响因素研究[J],岩土力学,2010,(04):1309-1313

代表性国家发明专利

1.一种新型恒压注浆装置及操作方法,2015.1.7-2034.10.15,中国,CN201410546743.9.

2.一种适用于孔隙砂岩的双液注浆材料及其注浆工艺,2014.11.19-2034.8.6,中国,CN201410383523.9.

3.适用于注浆模型实验的前进式分段注浆装置及使用方法,2014.7.16-2034.4.30CN201410180539.X.

4.隧道突水突泥与注浆处治三维模型试验系统及其试验方法,2014.7.16-2034.4.30,中国,CN201410183058.4.

5.定点控域新型注浆装置,2014.5.21-2034.1.26,中国,CN201410038751.2.

6.基于岩体温度场的地下工程含水体构造预报系统及方法,2013.3.27-2032.12.3,中国,CN201210509173.7.

7.一种地下工程施工钻孔产状组合量测装置及其量测方法,2013.3.20-2032.11.30,中国,CN201210507662.9.

8.一种对地层空洞内填充的骨料进行注浆固结的工艺及喷射钻头,2012.7.11-2032.1.20,中国,CN201210018842.0.

9.圆盘刻度定方位角的工艺方法,2012.12.12-2030.12.14,中国,ZL201010586255.2.

10.一种用于仰角钻孔止水套管封闭的工艺,2013.3.6-2030.10.25,中国,ZL201010518656.4.


[CLOSE]

Copyright © 2019 School of Civil Engineering shandong university All rights reserved.

School of Civil Engineering Civil Engineering Building, Qianfoshan Campus Shandong University 17923 Jingshi Rd, Jinan 250061, P.R. China
Email: tjfdw@sdu.edu.cn Tel:+86-531-88392446 Office Hours: Monday - Friday 8:30am - 5:30pm